免费全民斗地主

 您好,欢迎来到米朗科技官网!厂家直销:电子尺位移传感器拉绳位移传感器磁致伸缩位移传感器LVDT差动变压位移传感器等、集中润滑油泵。 
产品中心

直线/角度/液位/倾角位移传感器/电子尺/集中润滑油泵等专业制造商! 

    精益求精,用户至上,诚信为本!欢迎致电24小时全球服务热线:18988775303    
产品中心Product Categories

米朗MIRAN位移传感器和润滑油泵源头厂家品质图标
L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器Product introduction 您现在的位置:首 页 > 产品展示 > 产品详情
L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器
  • 产品详情
  • Product introduction
  • L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器
    L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器

    工作原理
    A:计量活塞动作行程
    B :伞形双向阀动作行程见上图,从润滑泵压送的
    油从主管A注入,并将伞形双向阀B向推开流入,通过通路C压送活塞室到F内。受压力油作用下计量活塞向下动作弹簧G被压缩蓄油,从而进行计量蓄油,当主管A内油压被释放〈即卸压〉,伞形阀B因压力差而动作,同时开启吐出口E,于是活室内计量蓄油通过吐出口E送入油管H而将油输送到润滑点, 信号销I当计量蓄油时突出.而供油给润滑点时缩回,从而确认分配动作完成情况。

    A: metering piston action schedule
    B: the action trip of the umbrella type two-way valve is shown in the figure above. The oil from the lubrication pump is injected from the director A, and the umbrella-type two-way valve B is pushed open. Push the piston chamber to F through the channel C.The piston moves downward under the action of pressure oil.The spring G is compressed.Thus the measurement of oil storage.When the oil pressure is released in charge of A(the discharge pressure). The umbrella valve B moves with pressure difference. At the same time, it opens the outlet E, so the living room measures the oil storage.The oil is transported to the lubrication point by outlet E to the pipe H, and the signal
    pin I is prominent when measuring the oil storage. When the oil is supplied to the lubrication point, it is retracted to confirm the completion of the distribution.